u型槽模具,电缆槽模具,水沟盖板模具-良心模具制造厂家
全国咨询热线:13313028229
当前位置:首页>>新闻资讯

很多人在使用护坡模具的时候

网址:www.moju58.com时间:2024-03-11 14:44:46(部分内容来源于网络,不代表本站观点)

When many people use the slope protection mold, there will be the problem of brick damage, and the customer will buy the slope protection mold because the product is not good.
很多人在使用护坡模具的时候,会出现砖破损的问题,客户购买护坡模具就会因为是产品不好造成的。

We have to correct this misunderstanding, first of all, as one of the slope protection mold manufacturers, we have more than 10 years of manufacturing experience, if the product quality is not qualified, this manufacturer can persist for so long without going out of business?
我们要纠正一下这个误区,首先作为护坡模具生产厂家之一,我们拥有十多年的生产制造经验,要是产品质量不合格这个厂家还能坚持这么久不倒闭吗?

This problem is worth thinking about.
这个问题是值得我们思考的。

Encountered problems we must first solve, mold out of the brick damage problem, as a manufacturer we have also encountered this problem, not a big problem, we summarized the following reasons for customer reference:
遇到问题我们首先要解决,模具出免烧砖有破损问题,作为生产厂家我们也是遇到过这种问题的,不是什么大问题,我们总结出以下原因供客户参考:

Mixed concrete material, mixed uneven, improper dry humidity or ratio, raw material particles are too large.
拌和完的混凝土料,拌和不均匀,干湿度或配比不恰当,原材料颗粒太大。

Treatment method: If the proportion of concrete material is no problem, adjust the dry humidity, humidity is too large or too small will affect the forming effect of the brick mix uneven, extend the mixing time, mix the concrete material evenly.
处理的方法:假如混凝土料的配比没问题时,调理一下干湿度,湿度太大或太小都会影响砖的成型效果拌和不均匀,延伸拌和时刻,将混凝土料拌和均匀。

If the raw material particles are relatively large, when the conveyor belt is fed into the hopper, it may cause the large particles of concrete to disperse to the two ends, which may cause the bricks at both ends to crack.
假如原材料颗粒比较大,运送带在往料斗投料时,可能会致使大颗粒的混凝土料离散到摆布两头,可能会致使摆布两头的砖裂掉。

微信扫一扫

在线客服
联系方式

咨询热线

13313028229

微信

13313028229

上班时间

周一到周六8:30-5:00

二维码
线