新闻动态
U型槽就是是模压工艺成型的地板,V型槽是基材经过切割成槽。
U-shaped groove is the molding process of the floor, V-groove is the substrate after cutting into a groove.
V型槽的地板,链接比较稳定。U型槽的地板,连接稳定性相对来说较差。U型槽是一次模压成型,在整张地板上进行模压,损伤耐磨层,虽然易于打理,不易藏灰,但使用中倒角会脱落,缩短使用寿命,
V-groove floor, link more stable. The connection stability of U-groove floor is relatively poor. The U-groove is one-time molding, which is molded on the whole floor and damages the wear-resistant layer. Although it is easy to take care of and not easy to store ash, the chamfering will fall off during use, thus shortening the service life,
圣象V型槽地板是采用二次价格倒角,不损伤强化地板耐磨层,在日后的地板保养和使用上避免倒角磨损,延长使用寿命,流畅的线条更具现代时尚感。模压槽许多较大的厂家都不会去做的。 “软”表面“模压”出槽,普通的模压工艺只能在基材密度不高的表面模压成型,劣质基材、作坊式模压工艺生产的仿实木产品,压痕槽口很容易变形。模压的地方密度与板身密度不同造成起翘,变形……所以现在知名品牌基本不生产模压u型槽工艺的地板。V型槽一般来说应该是刀具一次性切割成型。这样既不会损坏地板本身平衡的密度结构,也就不会损坏地板的稳定性了。但是v型槽工艺肯定不如模压工艺的地板(因为有个斜面)易于清洁……
The holy elephant V-groove floor is chamfered at the second price, which does not damage the wear-resistant layer of the laminate floor. In the future, the floor maintenance and use can avoid chamfering wear and prolong the service life. The smooth lines have a modern sense of fashion. Many larger manufacturers will not do the molding groove. "Soft" surface "molding" out of the groove, the ordinary molding process can only be in the substrate density is not high surface molding, low-quality substrate, workshop type molding process to produce imitation solid wood products, indentation notch is easy to deform. The density of the molded place is different from that of the board body, causing warping and deformation So now the well-known brand basically does not produce molded U-groove process floor. Generally speaking, the V-groove should be one-time cutting and forming. In this way, it will not damage the balanced density structure of the floor itself, and it will not damage the stability of the floor. But the V-groove process is certainly not as easy to clean as the molded floor (because of a slope)

版权 © 保定市清苑区大进模具加工厂  推荐产品:u型槽模具,电缆槽模具,水沟盖板模具等   网站制作:保定遨游公司